Concrete Driveway Cost Calculator
Estimated Total Cost
$2,880 – $5,760
$6.00 – $12.00 per sq ft (installed)
Material
$1,440 – $2,880
Labor
$1,440 – $2,880
Area
480 sq ft
Finish
Standard
Tip: Get at least 3 quotes from licensed concrete contractors. Ask about thickness (6" is standard for driveways), rebar or wire mesh reinforcement, and control joint spacing.
Broom Finish: The standard and most affordable concrete driveway finish. Provides excellent traction in wet conditions. Clean, classic appearance that complements any home style. Lasts 25–40 years with proper maintenance.
Disclaimer: Estimates are for budgeting purposes only. Actual costs vary by location, contractor, material availability, and project complexity. Always get professional quotes for exact pricing.
Concrete Driveway Cost Breakdown
| Finish | Material / Sq Ft | Labor / Sq Ft | Total / Sq Ft |
|---|---|---|---|
| Standard (Broom) | $3 – $6 | $3 – $6 | $6 – $12 |
| Stamped | $4 – $8 | $4 – $10 | $8 – $18 |
| Colored / Stained | $3.50 – $7 | $3.50 – $7 | $7 – $14 |
| Exposed Aggregate | $4 – $8 | $4 – $8 | $8 – $16 |
| Polished | $4 – $8 | $5 – $10 | $9 – $18 |
* Costs shown for new installation (1.0× labor). Remove & replace adds 15%, extend existing adds 10% to labor.
Average Project Costs (New Installation)
| Project | Size | Finish | Estimated Total |
|---|---|---|---|
| Single-Car | 200 sq ft | Standard (Broom) | $1,200 – $2,400 |
| Two-Car | 480 sq ft | Standard (Broom) | $2,880 – $5,760 |
| Large Driveway | 720 sq ft | Standard (Broom) | $4,320 – $8,640 |
| Stamped Two-Car | 480 sq ft | Stamped | $3,840 – $8,640 |
How We Calculate
Our concrete driveway calculator estimates project costs based on driveway area, concrete finish, and project condition. Material and labor costs are calculated per square foot, with labor adjusted by a condition multiplier.
How the math works: Material cost = area × material price per sq ft. Labor cost = area × labor rate per sq ft × condition multiplier. Total = material + labor. The condition multiplier adjusts labor: new install is 1.0×, remove & replace adds 15% (1.15×) for demolition, and extending existing adds 10% (1.1×) for tie-in work.
Concrete Finish Comparison
Standard (Broom Finish) ($3–$6/sq ft material, $3–$6/sq ft labor) is the most common and affordable driveway finish. Provides excellent traction, clean appearance, and maximum durability. The workhorse choice for most homes. Lifespan: 25–40 years.
Stamped Concrete ($4–$8/sq ft material, $4–$10/sq ft labor) mimics brick, stone, flagstone, or tile patterns stamped into wet concrete with integral color. Premium curb appeal at lower cost than real stone. Requires resealing every 2–3 years. More prone to showing cracks.
Colored/Stained ($3.50–$7/sq ft material, $3.50–$7/sq ft labor) adds permanent color through integral pigment or acid staining. Integral color is mixed throughout; acid stain creates a mottled, natural look on cured concrete. Mid-range upgrade that enhances curb appeal.
Exposed Aggregate ($4–$8/sq ft material, $4–$8/sq ft labor) reveals the natural stone aggregate by washing away the top cement layer. Attractive pebbled texture with excellent traction. Very durable and low-maintenance. Popular for modern and mid-century homes.
Polished Concrete ($4–$8/sq ft material, $5–$10/sq ft labor) is ground and polished to a smooth, glossy finish. Modern, high-end appearance. Best suited for covered driveways and carports. Can be slippery when wet without anti-slip sealer. Exceptional durability.
Additional Cost Factors
Our estimates cover concrete material and installation labor at standard 6-inch thickness. Not included: excavation and grading ($1–$3/sq ft if needed), rebar or wire mesh ($0.50–$1.50/sq ft), concrete apron at street ($500–$1,500), drainage solutions ($500–$3,000), old driveway demolition ($2–$5/sq ft), permit fees ($50–$200), and decorative borders or inlays ($5–$15/linear ft).
Data Sources
Pricing data is compiled from HomeAdvisor, Angi, concrete contractors, and ready-mix suppliers across multiple US regions. We review and update this data regularly.
Last updated: 2026-02-02
Frequently Asked Questions
How much does a concrete driveway cost? +
A concrete driveway costs $6–$18 per square foot installed, depending on finish. Standard broom finish is $6–$12/sq ft, stamped $8–$18/sq ft, colored/stained $7–$14/sq ft, exposed aggregate $8–$16/sq ft, and polished $9–$18/sq ft. A typical two-car driveway (480 sq ft) costs $2,880–$5,760 for standard finish.
Is concrete or asphalt better for a driveway? +
Concrete costs more upfront ($6–$12 vs. $3–$6/sq ft for asphalt) but lasts 25–40 years vs. 15–25 years for asphalt. Concrete requires almost no maintenance, while asphalt needs sealcoating every 2–3 years. Concrete offers more finish options and higher curb appeal. Asphalt is better for cold climates where salt and freeze-thaw cycles are common.
How thick should a concrete driveway be? +
Standard residential driveways should be 6 inches thick with a compacted gravel base of 4–6 inches. Heavy vehicle traffic (RVs, trucks) may require 8 inches. The concrete should be at least 3,500 PSI (4,000 PSI recommended). Wire mesh or rebar reinforcement is essential to prevent cracking.
How long does a concrete driveway last? +
A properly installed concrete driveway lasts 25–40 years. Standard broom finish lasts the longest with minimal maintenance. Stamped and colored concrete may need resealing every 2–3 years to maintain appearance. Control joints, proper drainage, and avoiding deicing chemicals extend lifespan.
Should I get stamped concrete? +
Stamped concrete costs $8–$18/sq ft vs. $6–$12/sq ft for standard — a 30–50% premium. It mimics the look of brick, stone, or pavers without the joints and settling issues. However, it's more prone to cracking, requires resealing every 2–3 years, and repairs are harder to match. Best for decorative areas where appearance matters most.
How long before I can drive on new concrete? +
Wait at least 7 days before driving on new concrete. Full cure takes 28 days — avoid heavy vehicles during this period. Keep the surface moist for the first 3–5 days for proper curing. Don't apply sealant until 30 days after pouring. Avoid deicing chemicals for the first winter.
Can a cracked concrete driveway be repaired? +
Small cracks (<1/4 inch) can be filled with concrete crack filler ($5–$15 per tube). Larger cracks may need routing and sealing ($3–$8/linear ft professional). Sinking sections can be mudjacked ($3–$6/sq ft) or foam-lifted ($5–$10/sq ft). Full replacement is needed when cracking is widespread or the slab has shifted significantly.
Related Calculators
Plan Your Next Project
Explore more free calculators to estimate costs and materials for your home improvement projects.